Right Choice Moving & Storage © . ALL RIGHTS RESERVED.
Moving appliances from one home to another requires know-how and a great deal of coordination. A moving company will do all of the heavy work -- the actual transporting of your appliances from your home into the van and then safely out of the van into your new residence. However, the preparation of major appliances and other home furnishings is an important activity for you to schedule.
When planning the many important details of a move, be sure to properly prepare for the transportation of major appliances and other home furnishings. Depending upon the item, special precautions may be required.
Take care of these preparations yourself.
Hire an appropriate technician.
Request that the moving company make the arrangements for you at an additional charge.
“Servicing” means preparing appliances so they will safely withstand handling during transit or while in storage. This process can include bracing a washer tub, disconnecting an ice maker, capping off a gas line, and special handling of satellite dish components.
Responsibility for Servicing The Appliance Service Company Representative Prepares the appliances for safe handling prior to transit and/or shipment.
Disconnect appliances ( ice maker, washer, dryer, etc) or reconnect them in the new residence.
Remove or install window air conditioners or television and radio antennas.
Perform wiring, plumbing, electrical or carpentry services.
When you reach your destination, carefully check the inventory of your household goods and antiques before signing for receipt. If any servicing or reassembly is required after you reach your new home, advise your destination agent who can make any necessary arrangements.
Thorough cleaning and drying of appliances, particularly the refrigerator, freezer and range, are necessary. This is especially important if they will be in storage for any length of time.
Cleaning instructions are included in the owner’s manual which accompanies new appliances. If no instructions are available, use a mild detergent solution. Or, use a solution of three quarts of warm water to which one tablespoon of vinegar has been added. Do not use harsh abrasives that will scratch or mar finishes. A soft cloth or vacuum cleaner will remove excess dust. Soft rags make excellent drying and polishing cloths.
The following are general guidelines for cleaning and servicing major appliances.
If your owner’s manual provides other directions, please follow them.
Leave the door open for several hours to ensure that the appliance is thoroughly dry.
Shut off the electric and water supplies.
Disconnect and drain the water inlet line and water valve.
Sponge any remaining water from the bottom of the dishwasher (if applicable, removing any pump cover inside the appliance and wiping dry).
Use a soft cloth and appliance cleaner to wipe off the exterior.
On the inside,clean lint filter and tub with a soft dry cloth.
Leave the lid open so that any moisture will evaporate.
Turn off water faucets, disconnect and drain hoses.
Wrap the metal connector ends of hoses in a towel and place inside the washer.
After your move, be sure to have the washer connected by a qualified installer.
Ask Right Choice Moving about third-party appliance servicing. There are more than 20 different washer moving kits available from various appliance manufacturers. The cost for third-party servicing is nominal, especially for the protection it provides to your washer.
Unplug the dryer or turn off the electrical power to the appliance.
Remove any debris from the lint screen with your fingers or a dry paper towel. Do not use water on the screen.
Wipe off the exterior with an appliance cleaner and soft damp cloth.
If the drum is discolored, try a mild liquid household cleaner or a paste of laundry detergent and warm water. Rub the area until the discoloration is removed. Wipe thoroughly. Then reconnect to electricity and operate the dryer with a load of old rags to remove any soap residue and to thoroughly dry the drum. Remove the rags when finished.
Disconnect the electrical supply to the appliance.
For a gas dryer, the appliance should be disconnected and the gas line capped off before moving day by a qualified service technician.
At destination, use a qualified installer who is familiar with requirements for gas and or electricity, as well as the exhaust system.
Wipe off the outer surface of the range with a mild detergent.
Detach and wash in hot soapy water any removable parts such as knobs, drip pans, grates, broiler pan and oven racks.
Plug-in coils for an electric range should not be immersed in water; spills on these units normally burn away as heated.
If your range top can be raised, clean the area underneath with hot soapy water.
Clean all removable items before packing day so they can be wrapped and placed in a carton or any storage compartment on the range.
Be sure to follow guidelines listed in your owner’s manual, or call the appliance manufacturer for information on our specific model.
For a gas range, it must be disconnected prior to moving day by a qualified service technician. At destination, you will need a qualified gas installer to check your gas supply, connect the range to the gas line, seal any openings, light the pilot and handle any other hook-up procedures.
For an electric range, generally no servicing at origin is required. However when you reach destination, have your power supply checked for the current electrical requirements. Certain ranges, such as those with air-ventilated grills, vary on the voltage they require.
Use a cloth and mild detergent to wipe off the exterior finish.
Before cleaning the interior, dispose of perishables and unplug the power cord.
Wash removable parts such as shelves and drawers with a mild detergent or in a solution of warm water and baking soda (about one tablespoon of baking soda to one quart of water). Ice trays and ice storage bins should be washed in lukewarm water only.
Wash the interior walls and any non-removable parts with a mild detergent or baking soda solution.
Leave the door open for at least 24 hours. Allowing all moisture to evaporate. If your refrigerator is not a frost-free model, allow extra time to complete defrosting and drying.
Secure all loose plastic parts.
Double-check the butter and egg compartments; be sure the appliance is totally empty and clean. A refrigerator which is not cleaned before transit can develop an unpleasant, permanent odor, making the appliance unusable at destination.
After cleaning, place an odor and mildew preventative in your refrigerator.
At the bottom of the refrigerator, remove the base covering and vacuum the condenser or compressor.
Empty and clean the evaporator pan; allow time for it to dry.
Turn off the water and disconnect the water line if you have a cold water dispenser or automatic ice maker. You should also empty the water reservoir.
If your refrigerator is an older model, you may need to have the motor or compressor bolted down. The majority of refrigerators now are sealed units that do not require this service.
At destination, do not operate the refrigerator for at least 24 hours after delivery. This allows the oil time to settle, preventing possible damage to the compressor.
Ice makers and water dispensers must be connected to a water line. Installation service or parts can be obtained from an authorized dealer for your appliance. Copper tubing, a shut-off valve and fittings may be required. Once your ice maker is in service, dispose of the first few batches of ice because of possible impurities from opening a water line.
Ideally, freezers should be empty during a move for the following reasons:
FINAL THOUGHTS - Be sure to consult Right Choice Moving if you have special questions or concerns. Proper preparation prior to a move will ensure the enjoyment of your appliances for many years to come.